In this paper, we propose a cross-correlation method applied to multistatic ground penetrating radar (GPR) data sets to detect road pavement damage. Pavement cracks and delamination cause variations in electromagnetic wave propagation. The proposed method can detect velocity change using cross-correlation of data traces at different times. An artificially damaged airport taxiway model was measured, and the method captures the positions of damaged parts.

This paper presents a calibration method for RF switch channels of a near-range multistatic linear array radar. The method allows calibration of the channel transfer functions of the RF switches and antenna transfer functions in frequency domain data, without disconnecting the antennas from the radar system. In addition, the calibration of the channels is independent of the directivities of the transmitting and receiving antennas. We applied the calibration method to a 3D imaging step-frequency radar system at 10-20GHz suitable for the nondestructive inspection of the walls of wooden houses. The measurement range of the radar is limited to 0-240mm, shorter than the antenna array length 480mm. This radar system allows acquiring 3D imaging data with a single scan. Using synthetic aperture radar processing, the structural health of braces inside the walls of wooden houses can be evaluated from the obtained 3D volume images. Based on experiment results, we confirmed that the proposed calibration method significantly improves the subsurface 3D imaging quality. Low intensity ghost images behind the brace target were suppressed, deformations of the target in the volume image were rectified and errors the range distance were corrected.

The finite-difference time-domain (FDTD) method has been widely used in recent years to analyze the propagation and scattering of electromagnetic waves. Because the FDTD method has second-order accuracy in space, its numerical dispersion error arises from truncated higher-order terms of the Taylor expansion. This error increases with the propagation distance in cases of large-scale analysis. The numerical dispersion error is expressed by a dispersion relation equation. It is difficult to solve this nonlinear equation which have many parameters. Consequently, a simple formula is necessary to substitute for the dispersion relation error. In this study, we have obtained a simple formula for the numerical dispersion error of 2-D and 3-D FDTD method in free space propagation.

In computer simulation of a large number of moving objects (MOs), how to enlarge Δt (the interval between the simulation time steps) without introducing causality errors is one of the primary keys to enhancing performance. Causality errors can be avoided by using the same Δt among related MOs when they are in the scene of detection (SoD). But in a large-scale MO simulation, MOs interact with one another in a complicated manner requiring a large calculation cost to predict the beginning time of SoD. In this paper we propose an event-aware dynamic time step synchronization method (DTSS) for distributed MO simulation, which increases Δt without introducing causality errors and speeds up the simulation. DTSS can be implemented with little calculation cost because: (1) DTSS does not calculate the beginning time of SoD exactly, but calculates the time for possible entry into SoD with a simple mechanisim, and (2) MO simulation consists of a "movement"-phase and a "detection"-phase in which the distance-calculation between MOs requires a heavy load, and DTSS utilizes the distance values to calculate Δt. In this paper, we also discuss a suitable HLA based time management mechanism to implement DTSS on a distributed computing environment. In the performance evaluation of DTSS, the calculation cost of DTSS is implemented by using the HLA suitable time management mechanism. The results show that DTSS can be executed within the ideal time plus its 1% over-cost when a basic scenario of war-game simulation is employed. Therefore if the ratio of SoD to the total simulation is small, the execution time is expected to decrease to nearly this ratio. We also introduce the criterion for determining when DTSS is superior to the conventional method by using the performance evaluation results. The results presented in this paper are effectively utilized when DTSS is applied to practical applications.

The Paper describes design and experiment of 2nd cyclotron harmonic peniotron at microwave region using a permanent magnet system. The magnet system using a cylindrical magnet magnetized along the cylindrical axis is designed and fabricated. The 2nd cyclotron harmonic peniotron operating at the π mode in a six vane magnetron waveguide resonator and at 5 GHz was constructed by using the magnet system. The peak electronic efficiency higher than 30% was achieved at the π mode in the resonator.